 (Recall) - Gorilla Inc. Recalls EXO-Tech Safety Harness Due to Fall Hazard
The webbing of the waist belt on the safety harness is not routed through the lineman's loop located on the front of the harness near waist level. Since the loops are not properly anchored to the harness webbing but are attached only through stitching not intended to restrain a user during a fall, they that can pull away from the harness when force is applied, leaving the user unrestrained. In addition, the manufacturer of the harness used a previously untested carabiner connector located at the end of the tether at the back of harness, which is the portion of the tether that attaches to the tree. Thank you to the US Consumer Product Safety Commission...
| 
Linear Mode
